1. Certain models have a DIP switch which you can use to switch the working mode of the device: a: Extend mode: The rate of LAN ports is reduced to 10 Mbps. Typically, the transmission distance is 200 m (656.17 ft), which is up to 250 m (820.21 ft) in the laboratory environment with Cat5e cables or higher. In addition, factors such as cable quality, powered device performance, and ambient temperature may causethe transmission distance to be less than 250 m (820.21 ft). 2. The other models that support long-distance transmission but without the Extend mode have adaptive LAN ports. Changing the port rate on the the powered device to 10M and the long-distance transmission is automatically negotiated on theES100 switches. Notice: For detailed information regarding the DIP switch, please consult the hardware installation of corresponding device model. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
