How to make users access the internet without authentication after enabling captive portal?

Requirements
After enabling captive portal authentication on Ruijie EG/ Reyee EG/ Ruijie AP, the authentication page will pop up when the user IP address is in the authentication range. However, for some users who cannot pop up authentication page, such as printers, you need to perform some special settings.
Topology


Configuration Tips
Ruijie EG
EG as DHCP serves for Intranet users, you can statically bind the IP addresses of these users or devices to the EG. For example 192.168.1.13 as a printer ip address.

When configuring the auth IP range of the captive portal, exclude that IP address.

3. Ruijie AP

Configure whitelist, sta mac-address:aaaa.bbbb.cccc

Ruijie>enable
Ruijie#config ter
Ruijie(config)#wids
Ruijie(config-wids)#whitelist mac-address aaaa.bbbb.cccc   ----->aaaa.bbbb.cccc is accessed to pass
Ruijie(config-wids)#whitelist max 1024 ----->adjust whitelist capacity(range from 1-2048, optional config)
Ruijie(config-wids)#end
Ruijie#wr

For more configuration of Ruijie AP, you may refer to this post:
How to config Whitelist/Blacklist for wireless users on Ruijie AP?

Verification
Testing with mobile phones so that we can see the result:
Before enabling the whitelist of this user, it will pop up the authentication page and users need to click it to login then access the internet:

<span style=""">After enabling the whitelist of this user and trying to access the internet again, it can connect to SSID and access internet directly:
</span>

<span style=";">
</span>