|
(1) Check that the network cable is properly connected to the LAN port of the device and that the corresponding LED indicator blinks or is steady on (2) Please follow this guide How to log in to Reyee EST series device? to log in to the device. It is suggested to connect to the EST default wireless SSID and log in with the default IP address. (3) Run the ping command to test the connectivity between the PC and the device. (4) If the fault persists, restore the device to factory settings. (5) If the problem is still unsolvable, you may start a Live Chat with our Support Engineer for assistance: Ruijie Support . |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
