Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

how to configure openvpn? Reply

GTAC-Daisy

Level 1

how to configure openvpn?
10844 2 2022-3-24 20:46:50
Original
Reyee EG model support OpenVPN: EG105G V2, EG210 series with latest firmware version.
Below steps will show you how to configuration OpenVPN on Reyee EG.
1. Steps 1: Login in to EG => VPN menu => OpenVPN.

2. Steps 2: Enable OpenVPN and select/ input VPN information to below fields.
+ VPN type (Server/Client) based on your needed
+ Server Mode - 3 authentications method supported: Account, Certificate, Account & Certificate
- Account mode: you have to create account at VPN => VPN Clients
- Certificate: VPN connection will use certificate to auth.
- Account & Certificate: use both methods
+ Protocol: TCP or UDP
+ Server Address: IP/domain (your WAN ip address) or your domain name.
+ Port ID: 1194 by default.
+ IP Range: the IP will assign to client device.
+ Deliver Route: based on your network, you can add more than one route.
Advanced configuration:
- TLS authentication: to secure your VPN connection with TLS key
- Allow Data Compression: Yes by default.
- Route All Traffic over VPN: No by default.
- Ciper: Allow you to chose data encryption algorithms, by default will be AES-128-CBC
- Deliver DNS: will assign DNS address to client device.
- Auth: SHA1 by default.

3. Steps 3: Save configuration by click to Save button and Export Client Config/ Server log

4. Steps 4: Download and install OpenVPN application to your PC
- You can download OpenVPN client in this link (select suitable version for your PC): https://openvpn.net/community-downloads/

5. Steps 5: Import Client config to OpenVPN client after installed on your PC.
- Extract Client that you downloaded before then you will get etc folder with client.ovpn file
- Right click to OpenVPN icon on try system and chose Import => Import file... => browse to the location client.ovpn extracted.


File Imprted successfully then you can connect to VPN

6. Final steps: Right clict to OpenVPN icon on try system then select connect, if you using Account authentication method then you have to input your vpn account at this step.


Connection success and able to access to HQ resource.

0 2023-7-9 10:24:26 View all replies
How to bind OpenVPN Client to specific SID?

0 2023-7-9 10:41:07 View all replies
John Doe replied at 2023-7-9 10:24
How to bind OpenVPN Client to specific SID?

Dear John,

Could you please provide more details about SID in OpenVPN?
You may refer to a more complete configuration guide on OpenVPN on page 298 of this configuration guide:
https://www.ruijienetworks.com/resources/preview/ruijie-reyee-rg-eg-series-routers-web-based-configuration-guide-release-reyeeos/




Best regards,
Jayden

Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd