|
Three Devices Using the RGOS 11.X Software Platform Are Used to Create a VSU. What Are Differences Between the VSL Configuration and That on Devices Using the RGOS 10.X Software Platform? |
|
Configuration Differences 11.x vsl-port port-member interface tenGigabitEthernet 1/1 port-member interface tenGigabitEthernet 1/2 10.x vsl-aggregateport 1 port-member interface tenGigabitEthernet 1/1 fiber vsl-aggregateport 2 //Add the link used for interconnecting to another device to another aggregate group. port-member interface tenGigabitEthernet 1/2 fiber Principle Analysis For devices using the RGOS 10.X software platform, specified ports of different devices need to be added to an aggregate group, and connection errors may occur in this case. Improvements are made to devices using the RGOS 11.X software platform and only ports need to be added to one resource pool. Then, the software automatically negotiates to add them to an aggregate group, without manual intervention. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
