1. Topology 2. Configuration Steps 1. connect console cable to the switch 2. Refer to chapter system management>console management 1). Manually reboot the switch 2). Press Ctrl+C when system rebooting 3). Press CTRL+ Q,then input "ubootui", press ctrl + p as soon as you hit enter 4). Then put the following commands: s29xs#setenv runlevel 2 s29xs#run linux 5). Run the following command and notice the space between the commands. ~ # ~ # cd /data/ /data # ls /data # mv config.text config.bak /data # sync /data # reboot 3. Verification Login in switch it can directly access Set the new password for switch |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd