|
How to configure IPsec VPN on reyee gateway? Sample topolohy  HQ: Step 1: Choose VPN→IPSec and then add the policy  Step 2:configure the IPSec Security Policy    Branch: Step 1: Choose VPN→IPSec and then add the policy  Step 2:configure the IPSec Security Policy    Note: Make sure the IKE Policy and Connection Policy is the same on both side Finally: Check IPSec Connection Status  |
|
How to configure with NO-IP DDNS? |
Hasheemuddin Mohammad replied at 2022-6-8 20:59 Hi sir, you can follow t his picture to input the correct username and password of No-IP DNS.  |
|
How can I connect a PFSense router through IPSec to Ruijie Gateway? |
unknown unknown replied at 2022-10-28 14:21 Hi sir, the configuratios are most same, please note to make sure the VPN settings in PFSense are correct, especially the pre-shared key, nncryption algorithms and transform set. |
|
Greetings, How to connect through the internet when there is double NAT on both ends? |
Luis Puentes replied at 2023-7-6 21:33 May I confirm do you want to consult the case that both sides are on the Intranet, and the public IP address is other devices which is on uplink, how to configure it? If yes, you need to configure ipsec vpn on EG normally and configure port mapping on the public IP device. |
GTAC-Micca replied at 2023-7-7 19:45 Thanks for answering. The scenario is the following: I have to connect a laptop from my home to the central offices, the ISPs are different companies, and both offer services with dynamic IP and work over double NAT, I cannot open ports at both ends. What solution can I apply? ruijie has any cloud VPN service? |
Luis Puentes replied at 2023-7-18 08:36May I confirm the network environment of EG with you? 1. EG with dynamic IP and it is private ip address right? Is EG connecting to ISP directly? Or EG iis connecting to ISP router? 2. May I know what is meaning of "I cannot open ports at both ends" please? |
GTAC-Micca replied at 2023-7-18 09:49 The EG gateway is on a private IP, the ISP does not deploy a public IP, the NE pf EG is on remote site |
Luis Puentes replied at 2023-7-18 22:20 EG is connect to ISP directly or ISP router? Is there any device between EG and ISP? If EG on private IP, is there any device has public IP? |
|
Hi, I want to configure client to site VPN, but both sides have a private IP dinamic, is not possible open ports, both sides have a double NAT. both sides are connected direct to fiber ONT, no routers or another firewalls. |
Luis Puentes replied at 2023-8-29 23:09 You mean, ONT is also a private address, and one of the NAT is done on the ISP? If so, I'm sorry that VPN cannot be configured for this environment |
GTAC-Micca replied at 2023-8-31 09:36 Thankyou for you reply. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
