How to log in to the AP180 device management GUI
|
The initial management IP of AP180 is 192.168.110.1, but once connected to the network, the initial IP will be obtained through DHCP and then changed, so as a user if you want to modify the configuration of AP180, how to log in to the management GUI of the AP. |
|
Dear sir You can log in to the AP through the console or check the obtained ip address on the gateway device according to the MAC address of the AP. |
GTAC-Joy replied at 2023-8-28 16:35As a user I don't have a console line and I don't have permission to log in to the gateway device, how can I know the management IP and log in to the AP to change some config. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
