How to configure captive portal on Reyee RAP2260(E)？

In this example, the login option of captive portal is voucher.

1. Please make sure the device is online on ruijie cloud, the firmware version is R219 or above, and your Reyee AP is in the supported list of AP Portal.

The following Wi-Fi 6 Reyee APs support Ruijie Cloud's captive portal in the firmware version R219 or above:

RAP2260/RAP2260(E)/RAP2260(G)/RAP2260(H)

RAP6260(G)/RAP6260(H)

RAP6262/RAP6262(G)



2. Enter Configuration > Captive Portal page, click Add to create a new portal.

Enter the portal name, choose the login option, and click OK.



3. Enter Configuration > User Management page, click User Group and click Add button.

Enter the User Group name, set the policy, click OK.



4. Enter the Voucher page, click Add voucher, input the voucher quantity, choose the user group you created earlier, and click OK.



5. Enter Configuration > Basic page, create a new SSID, enable Auth function and select the portal page.

Click OK, and remember to click Save button.



6. Use your terminal to connect to the SSID with captive portal auth. When the portal page pops up, enter the authentication code on your terminal, then you will be able to access the Internet.


7. You can verify the user's online information on the Ruijie Cloud or the eweb of Reyee AP.

Can I use this setting to RAP2260(G) with latest firmware and using Login Account (not Voucher)?