How to enable captive portal auth on Reyee EG?

Cloud Portal Auth

Reyee EG devices support Cloud portal authentication, including one-click, voucher, account, SMS (integrated with Twilio) authentications.

Step1: Upgrade the reyee gateway to EG_3.0(1)B11P50 or above.

Step2: Add the reyee gateway to be online on Cloud and create the portal page.

Step3: Click Monitor->Gateway->device SN to enter the device details page

Step 4: Click Cloud portal auth.

Configuration example：

I've done this way, still not working

unknown unknown replied at 2022-11-30 10:42
I've done this way, still not working

Have you confirmed whether the authentication function is enabled on the eweb interface?

Rogrr D replied at 2022-12-8 18:05
Okay if you still have a query then kindly contact reyee router support

Same problem here. Have you fix it already?

GTAC-Micca replied at 2022-11-30 13:53
Have you confirmed whether the authentication function is enabled on the eweb interface?

ok but gateway not sync.

Alessandro Minuzzo replied at 2023-8-23 12:43
GTAC-Micca replied at 2022-11-30 13:53
Have you confirmed whether the authentication function is ena ...

Dear Alessandro Minuzzo,

Please kindly note the portal synchronization function is used to sync the Ruijie Cloud portal template to a Ruijie Enterprise EG for local auth. Since you have an EG105G-V2 which is a Reyee EG, you do not have to sync the portal template.

Best regards,
Jayden

Cloud New UI operation Steps：
1. Add Captive Portal Page and enable router Captive Portal auth.





2. Add auth account.
1）Add user group


2）Add the user group base on your requirement


3）Add the user base on your requirement