WS6008 Auth Web URL Symbol '?'

Hello
We would like to use Cisco ISE as Web Auth portal (ePortalv2) for guest network on our AC WS6008.
But as we found out, AC considers the character "?" which is contained in the URL string as incorrect.
Is there any way to point such URL to AC?
Thank

Can I confirm with you if you want to configure a url with the symbol "? "at this location?

GTAC-Micca replied at 2023-8-21 20:30
Can I confirm with you if you want to configure a url with the symbol "? "at this location?

Yes, this is the field.

We write via CLI

Dmitry Shalaev replied at 2023-8-21 20:46
Yes, this is the field.

We write via CLI

You mean you can't configure it on the web, but you can configure it on the cli, right

GTAC-Micca replied at 2023-8-21 21:04
You mean you can't configure it on the web, but you can configure it on the cli, right

I Both tried:
In Web - highlights in red and prevents you from entering;
in CLI - deletes question character '?' after input.

Dmitry Shalaev replied at 2023-8-21 21:41
I Both tried:
In Web - highlights in red and prevents you from entering;
in CLI - deletes question ...

Thank you for your reply, this is currently the limitation of the device, I am sorry for the inconvenience caused to you, I will help you feedback this demand to our R&D.


May I know is it possible to change the URL on your server?

GTAC-Micca replied at 2023-8-21 21:52
Thank you for your reply, this is currently the limitation of the device, I am sorry for the incon ...

the link (URL) in Cisco ISE is generated automatically (we cannot fix), we cannot change it.

Trying to get away from Cisco wifi controllers and change to Ruijie controllers

Would you recommend another Radius Server (Not Cisco ISE) or a mechanism for authorization in Guest SSID?

If the vendor Ruijie patched the presence of the question symbol '?', then we are would be happy!

Dmitry Shalaev replied at 2023-8-22 14:21
the link (URL) in Cisco ISE is generated automatically (we cannot fix), we cannot change it.

Tryi ...

If you use the wifi-controller Internal-Radius for the Guest SSID-VLAN (Max 300)?
Can you create accounts Internal-Radius accounts somehow through the Web interface?
We are able to use only CLI to create users of the internal Radius.
Please help!

Dmitry Shalaev replied at 2023-8-22 14:21
the link (URL) in Cisco ISE is generated automatically (we cannot fix), we cannot change it.

Tryi ...

I'm sorry, regarding product recommendation, I suggest you consult our pre-sales, they will give a more professional answer

GTAC-Micca replied at 2023-8-24 12:00
I'm sorry, regarding product recommendation, I suggest you consult our pre-sales, they will give a ...

Hello!
Colleagues, have this problem been fixed in the latest firmware?
Redirections URL, characters '?'
Or is that how it remains?


Thanks

Dmitry Shalaev replied at 2024-2-22 13:46
Hello!
Colleagues, have this problem been fixed in the latest firmware?
Redirections URL, charac ...

Current it still cannot support, I will feedback again for you. Thanks for your advice.