Trouble on cloud-eu.ruijienetworks
|
HI, It has often happened to me that the devices registered on the cloud-eu.ruijienetworks platform are unreachable. However if I try to contact them from the LAN they work perfectly. Could you tell me where I'm wrong? Thanks in advance. Greetings, GL |
|
I have find my error. I had in Maintenance > Settings > Device DNS > DNS Server 1 > Gateway IP, but it look like I was wrong (I'll try to explain the reason: some time ago I had a similar problem with the Reyee RG-RAP6202 APs and I had success pointing the DNS resolution via the gateway, so I started setting it like this in all my works). Now I change in 8.8.8.8 and it seems to work. However, I can't explain why it worked perfectly for over three months until November 11th. A lot of thx for your support. |
Giulio Leone replied at 2024-3-20 15:20 I am glad to hear that the AP can work normally now. If there are any problems, please feel free to contact us. |
|
Dear sir Please try to add acs url on the AP via these commands to test again: config te cwmp acs url http://devicereg.ruijienetworks.com/service/tr069servlet If you can not enable cwmp function, please change to macc mode first: ap-mode macc If the AP still can not be online, please help ping this domain: devicereg.ruijienetworks.com and show me the ping test results to further check. Best regards Jenny |
GTAC-Jenny replied at 2024-3-19 22:53 Ciao Jenny, Ho aspettato una decina di minuti ma niente. Ecco lo screenshot del ping all'indirizzo indicato:  |
Giulio Leone replied at 2024-3-19 23:12 Hi: The first step would check in the AP is working in MACC mode, to do it, please refer to the following link: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=5883 If the AP still is offline, please add the following commands using CLI on your AP and then check if this one can go online on cloud after that: Ruijie#conf t Ruijie(config)#cwmp Ruijie(config-cwmp)#acs url https://cwmpsvr-eu.ruijienetworks.com/service/acs/XXXXXXXXXXXXX Ruijie(config-cwmp)#end Ruijie#wr where XXXXXXXXXXXXX represents the SN of your AP. Regards, Javier |
GTAC--Javier replied at 2024-3-20 09:04 Javier, Thanks for the reply. the AP was always in MACC mode, I tried the CLI command but nothing new and the AP is still offline. So, reading the CLI command I have a question: is it necessary to also enter the CWMP page parameters?  |
Giulio Leone replied at 2024-3-20 14:28 Dear sir May I know whether your AP can ping through 8.8.8.8? If can, please try to add the DNS server on the AP so that it can resolve the domain name successfully: config te ip name-server 8.8.8.8 If the AP even can not ping through 8.8.8.8, please check the Internet first. For further assistance, you can send your network topology and the AP complete configuration to our email: service_rj(Ruijie International) <service_rj@ruijienetworks.com> and attach this link to solve your issue quicker. Thank you for your cooperation. Best regards Jenny |
GTAC-Jenny replied at 2024-3-20 14:40 Jenny,  ping it's good. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
