|
1. connect console cable to the switch 2. Refer to chapter system management>console management 1) manuallyreboot the switch 2) Press Ctrl+C when system rebooting  3) Execute “rename config.text config.bak” torename config.text to config.bak  4) execute "load"command to load the main program  5) After restarting, restore the configuration file Ruijie>enable Ruijie#copy config.bak config.text If an error occurs, use the following command torestore the configuration file: Ruijie#copyflash:config.bak flash:config.text Then use the following command to make theconfiguration effective: Ruijie#copystartup-config running-config  6) Change the password  3.Log in to the switch again with a new user nameand password to confirm that you can log in successfully Note: With this method of password recovery, your configuration will not belost. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
