|
Requirements Configure command authorization for the Login user. After the user logs in to the device through the terminal device, only commands within the authorization scope are allowed. Topology  Configuration Ruijie>enable Ruijie#configure terminal Ruijie(Config)#aaa new-model Ruijie(Config)#tacacs-server host 10.110.1.2 keysharekey Ruijie(Config)#aaa authentication loginlogin-method group tacacs+ local Ruijie(Config)#username host1 privilege 15 passwordpassword1 Ruijie(Config)#aaa authorization commands 15command group tacacs+ local Ruijie(Config)#line vty 0 4 Ruijie(config-line)#login authenticationlogin-method Ruijie(config-line)#authorization execcommand-method |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 6
