|
Click How to Setup WAN Load Balance on Reyee EG to configure load balance on Reyee EG. Here are the detailed configure steps to configure load balance on Ruijie EG: Introduction of WAN Load Balance The load balancing function distributes the data to multiple WAN interfaces to avoid the traffic congestion and provide redundancy. Case of configuration a) Network Topology  b) Configuration Key Point 1) Configure IP address of the WAN ports and default routes. 2) Enable the load balancing policy. 3) Customize interface weight to ensure that traffic goes through the different egress according to weight. C) Configuraiton Steps1) Configure WAN 0   2) Change the LAN1 port to WAN port  3) Configure WAN 1  4) Enable Load Balance  5) Configure the interface weight for two link    Configuration Verfication   Advice to add the following configuration to convert to reachable link when one of link can't be reached  IP address： The IP need to be reached Next Hop IP: The gateway IP of your WAN port IP |
|
is this the same as configuration in NBR series and EG Series? |
NosSon replied at 2024-4-30 10:06 Dear sir Yes, this is same configuration guide for NBR and Ruijie EG However, different versions of the interface may be different you can also refer to the WAN load balancing configuration via this link for NBR: https://reyee.ruijie.com/en-global/resources/preview/reyee-rg-nbr-series-routers-web-based-configuration-guide  Best regards, Ross |
GTAC-Ross replied at 2024-4-30 10:19 Thank you for your response. how about the Failover? |
NosSon replied at 2024-4-30 10:30 А можно уточнить конкретно для модели - EG105G-V2? Так как данная инструкция не соответствует внешнему виду и настройкам необходимой модели. |
ColdFire replied at 2024-6-24 21:43 Hi Cold Fire, There is the guide on how to configure load balance on reyee EGs like EG105G V2: community.ruijienetworks.com/forum.php?mod=viewthread&tid=1970&extra=page%3D1 |
GTAC-Vivian replied at 2024-6-24 21:56 Thank you. Slightly different from the current version, but it is clearer. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 2
