E-Lighten solution FAQs

1. Can the voice VLAN and management VLAN share the same segment?
2. Do voice VLANs require IP addresses from the DHCP server?
3. What type of optical port does the ONU use?
4. Can core switches in the optical network convergence be connected via the optical splitting port?
5. Can Reyee APs be connected to the ONU PoE switch?
6. Can the interface used for connecting the AP to the telephone be configured in the VoIP solution? If so, how can it be configured?
7. How can I make a phone call if there is no AP at the hotel reception desk ?
8. Does SIP in VoIP support TCP?
9. What audio encodings are supported by VoIP?
10. Can the optical APs roam with Ruijie Networks or Reyee Networks APs?
11. Can optical splitters from other brands be used?
12. Is the e-Lighten solution based on EPON or GPON?
13. How is the optical AP powered?
14. How is uplink bandwidth congestion solved with Ethernet optical (PoE) technology, which uses the same rate as EPON for PON ports and utilizes TDMA for uplink?
15. How many levels of optical splitting are supported by the e-Lighten switch?
16. Can the OLT of Ruijie's e-Lighten+ solution support ONUs of other vendors?
17. Can the switch work with optical PON modules from other vendors?
18. Can APF1250 be installed on an 86-type junction box?
19. Can the uplink port of the optical splitter be aggregated or used as a backup?
20. What is the self-organizing network (SON) priority of the OLT and ONU?
21. What does the optical power -40 indicate in the optical module information?