External Captive Portal Sample Page

Hi all,
I'm using Ruijie AP720-L access point. I've setted up an eportalv2 authentication to my external captive portal and my radius server.
When the user wants to connect to network, my redirect url popups up and i'm getting all the query strings about connection (wlanuserip, wlanacname, ssid, nasip etc.).

Then i get username and password from the user. But i don't know how to send this information to NAS for starting authentication to radius.

Do you have any sample pages or scripts about external captive portals?

Does anyone have an answer to this? I've stumbled with the same problem.  I couldn't figure out how to send the request to the NAS in order to authorize the user.

I have the same Problem. Please Ruijie Team, could you help us?

Dear sir,

Sorry for later reply.
Could you screenshoot the picture after import username and password.
If you are hurry for this question, welcome you contact us using Skype or caseportal
our Skype account is Ruijie Technical Support
caseportal url is https://caseportal.ruijienetworks.com/

Hi any update regards on this problem? thank you

Hi any update about this?

Accordingly, the External Portal is supported by clicking the Advance button to enter External Portal Page



and then you may found the External Portal configuration page.


for more info please check on this link
http://cloud-as.ruijienetworks.c ... iguration__Wireless

Andrew replied at 2022-3-17 16:48
Accordingly, the External Portal is supported by clicking the Advance button to enter External Porta ...

SERIOUSLY, RUIJIE? NO UPDATE ABOUT THIS UNTIL NOW?

Earvin Yu replied at 2023-2-15 12:29
SERIOUSLY, RUIJIE? NO UPDATE ABOUT THIS UNTIL NOW?

Hello,

I have the same problem. Is there any update?

Fevzi Can Sahinler replied at 2025-1-11 19:15
Hello,

I have the same problem. Is there any update?

Hi sir,
You can refer to this link to configure it:
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3114&extra=page%3D1
If you use Ruijie Cloud for AP management, you can also check this guide from chapter 3:
https://cloud.ruijienetworks.com/help/#/ArticleList?id=263767b80c8a476482eb8530e50341e8

Best regards,
Lex

Fevzi Can Sahinler replied at 2025-1-11 19:15
Hello,

I have the same problem. Is there any update?

Hi sir,
You can refer to this link to configure it:
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3114&extra=page%3D1
If you use Ruijie Cloud for AP management, you can also check this guide from chapter 3:
https://cloud.ruijienetworks.com/help/#/ArticleList?id=263767b80c8a476482eb8530e50341e8

Best regards,
Lex

GTAC-Lex replied at 2025-1-11 21:00
Hi sir,
You can refer to this link to configure it:
https://community.ruijienetworks.com/forum.php ...

Hello,

I can already forward the external captive portal. However, my problem here is that I cannot find the callback url, where can I find it. When the firewall redirects to the external captive portal, it adds usermac username to the end of the url, which endpoint will I send a post request with username and password.

Fevzi Can Sahinler replied at 2025-1-12 00:27
Hello,

I can already forward the external captive portal. However, my problem here is that I can ...

Dear,


Eportalv2 authentication is using China Mobile CMCC standard protocol, the eportal server requires to meet this standard so that Ruijie AP can be able to integrate with it. The eportalv2 redirected auth url is:

218.201.22.9:8080/CQWLAN?wlanuserip=10.246.90.62&wlanacname=1600.0001.230.00&ssid=CMCC-EDU&NASID=1601000123000460

You can learn more about the eportalv2 authentication working process and try to custom the format of the webauth url via the following link:
https://www.ruijienetworks.com/support/documents/slide_RG-WLAN-Access-Points-Configuration-Guide-11-9-6-W3B3/?page=Wireless%20Authentication%20Configuration-Web%20Authentication%20Configuration&keyworks=eportalv2#_Ref435438028



For the external captive portal config on cloud, it is using wifidog protocol, you can refer to the following link to learn the format of wifidog web auth url format: https://cloud.ruijienetworks.com/help/#/ArticleList?id=4f324cfa2e3447e0a37d78a65e062239

For further assistance, please help provide your detailed requirement to our support email (service_rj(Ruijie International) <service_rj@ruijienetworks.com>). Please help alsp provide your device SN so that we can record this case first. Thank you for your cooperation.

Best regards

Jenny

GTAC-Jenny replied at 2025-1-12 10:34
Dear,

hello, I still can't find the redirect url. I am attaching my configurations as a picture. Firewall redirects to my external captive portal and adds parameters at the end like the url I gave below.
external-captive-portal-url?wlanuserip=192.168.50.104&mac=00-0c-29-6d-f3-c8&nasip=&url=detectportal.firefox.com/canonical.html&hostname=firewall
I should add username and password with these fields and send a request to which endpoint of the firewall. the model of the ruijie device I use is NBS3100-24GT4SFP-P. I am using portal 3.0 Can you please support me? Which endpoint should I send a request to?
I tried the endpoint in Help Center/ API Document/ Reyee EG WISPr Hotspot API, but nothing.  Can you please help me?
Thank you,

Fevzi Can Sahinler replied at 2025-1-13 02:26
GTAC-Jenny replied at 2025-1-12 10:34
Dear,
hello, I still can't find the redirect url. I am attach ...

Hello,

What I want to confirm is whether your device model is Z3200? NBS is a switch series device. Can you help me to double-check the model and version of your device?

If your device is RG-WALL 1600-Z-S Series, you can refer to this link and configure it first:
https://www.ruijienetworks.com/support/documents/slide_rg-wall-1600-z-s-series-cloud-managed-firewalls-ngfw-ntos-1-0r8p6-user-manual/?page=html&keyworks=portal%203.0#:~:text=2.%20%C2%A0%20Portal%203.0%20Authentication



Best Regrads,
Micca

GTAC-Micca replied at 2025-1-13 15:14
Hello,

What I want to confirm is whether your device model is Z3200? NBS is a switch series devic ...

Hello sir,

I am using NBS3100-24GT4SFP-P


I added my Radius server configuration. It redirects to the portal. Which endpoint on the ruijie device should I send the data in the form with the fields in the url and my user's login username and password (information attached in radius). Did I do the configuration wrong, can you please help me?

Best Regards,

Fevzi Can Sahinler replied at 2025-1-13 23:40
Hello sir,

I am using NBS3100-24GT4SFP-P

Hello,

Sorry i've send you my switch. That's my firewall series number.

Fevzi Can Sahinler replied at 2025-1-14 23:29
Hello,

Sorry i've send you my switch. That's my firewall series number.

Please help!!!

Fevzi Can Sahinler replied at 2025-1-15 01:36
Please help!!!

Hello sir,
So the issue now is on the firewall sir?

We recommend you to join us to rita's live chat to help you on real time and solve the issue.

Regards!