I config Ruijie router NBR 6215 but 2 Lan ports cannot communicate with each other

Port Gi0/1 VLAN 1  : 192.168.0.1/24
Port Gi0/2 VLAN2 : 192.168.2.1/24
Those 2 VLANs could not ping to each other, at the beginning of setup, they can auto send ping to each others, but later after Router automatically shut down, they could not anymore. Please let me know any documents I need to provide with the case
Additional the show ip route in CLI
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
S*    0.0.0.0/0 is directly connected, dialer 2
                is directly connected, dialer 1
C     14.176.103.55/32 is local host.
C     113.169.55.48/32 is local host.
C     123.29.12.60/32 is directly connected, dialer 1
S     169.254.242.168/32 is directly connected, GigabitEthernet 0/1
C     192.168.0.0/24 is directly connected, GigabitEthernet 0/1
C     192.168.0.1/32 is local host.
C     192.168.2.0/24 is directly connected, GigabitEthernet 0/2
C     192.168.2.1/32 is local host.

hi  
can you give me all show run  i need more information