Rate Limit for Clients

I want to set a speed limit for some users whose mac address I know. But I couldn't find it. The sources seem old

Dear customer,
You can configure flow control policy for your users via the steps below.

Configuration Steps on Ruijie Cloud (MACC Platform)

• Log in to Ruijie Cloud
  Access the platform via https://cloud.ruijienetworks.com/.
  
• Navigate to the Configuration Page
  
  
  • Click the Project tab in the top menu bar.
  • Select the project to which the target device belongs.
  • Go to Network-Wide > Optimization > Flow & App Control.
    
  </li>
• Enable Smart Flow Control
  
  
  • Click To Configure on the right of Flow Control.
  • Enable Smart Flow Control and set the WAN Bandwidth (uplink and downlink rates in Mbps).
  • Click Save.
    
  </li>
• Add a Custom Policy
  
  
  • After enabling Smart Flow Control, click Add under Custom Traffic Control Policy.
  • 
  • 
  • Configure the following:
    
    • Policy Name: Enter a name for the policy.
    • IP Range: Specify the IP address, VLAN, or user group(user group can be configure based on the MAC address. But it needs to be configured in the eweb of the EG).
    • 
      </li>
    • Bandwidth Type: Choose between Shared (all IPs share the bandwidth) or Independent (rate limit per device).
    • Rate Limit Mode: Select Overall Rate Limit or Per-IP Rate Limit.
    • Rate Settings: Set the maximum uplink and downlink rates.
    • Advanced Settings: Configure the minimum uplink and downlink rates if needed.
      
    </li>
  • Click OK to save the policy.
    
  </li>