Switch XS-1920S auto enable Protected Port
|
Some ports are auto enable Protected ports. I had disable but ports still is auto enable protected port. |
|
Dear sir, Please try to upgrade to the following firmware https://pan.ruijie.com.cn/share/4d9e9067cbaf533453eef292a1 After removing the port protect configuration, please write the configuration using following command, Ruijie#wr |
Daisy replied at 2021-7-13 17:30 Hi; i am having the same problem. can you renew the link? |
orhan.yucekul@i replied at 2022-1-17 19:29 https://pan.ruijie.com.cn/share/1b49e94d36dda884e1b9e4e133 |
GTAC-Daisy replied at 2022-2-14 22:12 Hi; i am having the same problem. can you renew the link? My model XS-S1920-9GT1SFP-P-E Thank you. |
Lertarit Poophat replied at 2025-3-4 18:25 link is close can you show me ' show version ' ' show run ' we can help you check this issue |
Edited by Lertarit Poophat at 2025-3-4 18:45 GTAC-Thomas replied at 2025-3-4 18:36System description : Ruijie Full Gigabit Security Intelligence Access Switch(XS-S1920-9GT1SFP-P-E) By Ruijie Networks System start time : 2024-12-27 19:14:37 System uptime : 66:22:24:09 System hardware version : 1.60 System software version : S19_RGOS 11.4(1)B70P4 System patch number : NA System serial number : G1NW6G500005A System boot version : 1.3.1 Module information: Slot 0 : XS-S1920-9GT1SFP-P-E Hardware version : 1.60 Boot version : 1.3 Software version : S19_RGOS 11.4(1)B70P4 Serial number : G1NW6G500005A POE01#sh run Building configuration... Current configuration: 2026 bytes version S19_RGOS 11.4(1)B70P4 hostname POE01 ! errdisable recovery interval 300 ethernet-port mtu 9216 rldp enable ! time-range aaa periodic Daily 4:00 to 4:10 ! username admin privilege 15 password admin ! poe warning-power 99 ip default-gateway 192.168.0.254 ! no service password-encryption clock timezone AsiaBangkok +7 0 ! vlan 199 name Guestwifi ! vlan range 1-2,4,22,99 ! interface GigabitEthernet 0/1 switchport mode trunk rldp port loop-detect shutdown-port poe enable poe priority critical poe max-power 36.0 ! interface GigabitEthernet 0/2 flowcontrol on switchport mode trunk rldp port loop-detect shutdown-port poe enable ! interface GigabitEthernet 0/3 switchport mode trunk rldp port loop-detect shutdown-port poe enable ! interface GigabitEthernet 0/4 switchport mode trunk rldp port loop-detect shutdown-port poe enable poe priority critical poe max-power 36.0 ! interface GigabitEthernet 0/5 flowcontrol on switchport mode trunk rldp port loop-detect shutdown-port poe enable ! interface GigabitEthernet 0/6 flowcontrol on switchport mode trunk rldp port loop-detect shutdown-port poe enable ! interface GigabitEthernet 0/7 switchport mode trunk rldp port loop-detect shutdown-port poe enable ! interface GigabitEthernet 0/8 switchport mode trunk rldp port loop-detect shutdown-port poe enable ! interface GigabitEthernet 0/9 switchport mode trunk rldp port loop-detect shutdown-port ! interface GigabitEthernet 0/10 switchport mode trunk rldp port loop-detect shutdown-port ! interface VLAN 1 ip address 192.168.0.180 255.255.255.0 ! interface VLAN 99 ! line console 0 line vty 0 35 login local ! endPOE01#sh run |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
