|
(1) Most outdoor APs are installed inhigh positions. Therefore, you must attach labels at both ends of each cableand make records to facilitate subsequent debugging, maintenance, andinspection. (2) During installation, tightenthe screws on brackets and ensure that the device does not move when you shakeit slightly. (3) When an omnidirectional antennais used, ensure that there is no metal object or obstacle within 30 cm in theantenna's horizontal direction. Otherwise, the coverage effect and performancemay be affected. (4) AP630 series products havethe built-in surge protection function (6 kV). When a lightning surge entersthe antenna and data ports, the built-in surge protection module can quicklyrelease the energy through the cable between the housing and ground. Therefore,the AP must be properly grounded. (5) If anti-theft is required in somelocations, you must prepare the anti-theft lock and prevent the device fromthefts based on the hardware installation manual. (6) Waterproof measures must betaken. For details, see the hardware installation manual or productinstallation video. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
