|
Yes. To ensure the same VLAN forthe AP and STA, run the following commands: Ruijie(config)# ap-config ap-name Ruijie(config-ap)# ap-vlanvlan-id (vlan-id indicates the VLANof the AP and STAs. It must be configured. Otherwise, wireless STAs cannotobtain the address.) During local forwarding, if theconfigured VLAN ID is the same as that assigned to STAs, the actual VLAN ofSTAs is determined by the access switch connected to the AP instead of the VLANconfigured in this command or the VLAN allocated in vlan-group mode. If the ap-vlan command is not configured, the default VLAN is VLAN1. During local forwarding, if thewireless STAs' VLAN is VLAN 1 while the AP VLAN is not VLAN 1, you need to run ap-vlan x on the AP (x indicatesthe AP's VLAN ID). Otherwise, wireless STAs obtain addresses in the AP addresssegment instead of the VLAN 1 address. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
