|
How to access your company local data from the internet through Ruijie Cloud Tunnel. With Ruijie/ Reyee gateway, Reyee AP devices, you can easily temporary open (NAT) port for your service with below steps. Make sure you have a Ruijie/ Reyee gateway in your network system. Step 1: Login to your Ruije cloudStep 2: On Dashboard select Monitoring tab -> DEVICE -> Gateway -> Click to Gateway Serial number to enter device detail page.  Step 3: Click Tunnel under Device Config.  Step 4: Create Tunnel -> Type: Custom -> Input your destination device IP address (such as NVR IP, FTP server IP, Webserver IP...) and Destination port -> Click Create Tunnel, waiting for few seconds.  For example: I'm going to create a Telnet Tunnel for my device with IP and destination port as above picture.  Step 5: Click Go in Action column, then you can see the Tunnel information.  - Now, you can using third party software such as Putty to access your device with above information. You can Disable and re-open this Tunnel any time by click Disable or Re-create button in Action column. Hope this tip help you. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
