|
How to upload clients ip address to radius server when use wireless 802.1X auth and mab auth |
|
About 1X and mab auth , can enable dhcp snooping on AC. and then ''dot1x valid-ip-acct enable'' on AC. Attention：with the second command, if the IP of clients is static ip, dhcp snooping table can't be generated, so the static ip clients will be kick offline |
| Client computers and devices, such as laptop computers, tablets, phones, and other computers running client operating systems, are not RADIUS clients. RADIUS clients are network access servers - such as wireless access points, 802.1X-capable switches, virtual private network (VPN) servers like the USA, UK France, etc, and dial-up servers -because they use the RADIUS protocol to communicate with RADIUS servers, such as Network Policy Server (NPS) servers this link will help you https://www.cisco.com/en/US/docs ... hapter_0111000.html |
AlmaMcAtee replied at 2021-6-29 08:23 thanks for your sharing  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
