|
1. Add a new VLAN port on LAN settings.  2. Configure the port based on the VLAN   3. Some items for port VLAN (1) Toconfigure port VLAN, need to add the VLAN interface first a)Whenadding vlan to the lan port, the range of vlan is 2-232, 234-4090 b)VLAN233 is occupied by default, this VLAN cannot be configured (2) Thereare 3 options in the each port: TAG, UNTAG, and not Join a)Forport 0, the UNTAG of the default VLAN cannot be modified b)Forother ports, only one vlan can be set to UNTAG and can be multiple TAG and NotJoin UNTAG：Theport does not carry the vlan tag when sending the packets, similar to thenative vlan configuration of the switch TAG: Thepackets corresponding to the VLAN sent from the port will carry the VLAN tag,similar to the non-native VLAN of the trunk port NotJoin：Theport does not belong to the vlan and does not participate in the forwarding ofthe vlan packet, which is removing the vlan when configuring the allow vlanunder the trunk |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
