Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

XS-S1920 Switch cannot reflect on cloud after change IP Address Reply

unknown unknown

Level 1

XS-S1920 Switch cannot reflect on cloud after change IP Address
8864 14 2021-6-9 21:31:15
Original
Hi All

Recently I setup a new XS-S1920 switch, it's initially using DHCP and reflcet in ruijie cloud.

Then, I changed it to fixed IP Address and reload the system, the ip is successfully established, but ruijie cloud cannot reflect the change and showed the device offline.

Does any can help?

Thanks


0 2021-6-10 09:42:07 View all replies
Hello, sir
Please check if configure DNS, if not, please configure DNS to 8.8.8.8.
Kind regards
Sunny

0 2021-6-10 13:10:47 View all replies
Tried but no luck. I also try to configure cwmp based on the ruijie cloud quick guide. is it necessary to unbind the device and reconnect again?

0 2021-6-10 13:13:48 View all replies
can configure other DNS up?

0 2021-6-10 13:14:29 View all replies
can configure other DNS IP?

0 2021-6-10 16:14:53 View all replies
better use 8.8.8.8.
can you ping 8.8.8.8 and cloud.ruijienetworks.com?
please input command "show cwmp config" "show cwmp stats"
and show me the result.

0 2021-6-10 19:29:19 View all replies
dongling replied at 2021-6-10 16:14
better use 8.8.8.8.
can you ping 8.8.8.8 and cloud.ruijienetworks.com?
please input command "show cw ...

Failed. How to set the gateway? using command ip route 0.0.0.0 0.0.0.0 x.x.x.x is not work

ip route 0.0.0.0 0.0.0.0 10.x.x.1
                            ^
% Invalid input detected at '^' marker.

Thanks

0 2021-6-11 09:12:24 View all replies
Please try this:
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#ip default-gateway x.x.x.x ---gateway IPRuijie(config)#end
Ruijie#

0 2021-6-11 10:17:59 View all replies
tried but return above error. is that any GUI can change the gateway option?

0 2021-6-11 20:46:34 View all replies
Edited by ty.principal@peck.edu.hk at 2021-6-11 20:56

0 2021-6-12 15:19:48 View all replies
Edited by ty.principal@peck.edu.hk at 2021-6-13 11:22

It's finally work. need to use the following command while configure terminal.

ip default-gateway x.x.x.x(your gateway IP)

*no need to use command "ip route 0.0.0.0 0.0.0.0 x.x.x.x" in my device
thanks all your support.

Cheers

0 2021-6-17 13:52:52 View all replies

Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#ip default-gateway 192.168.1.254     
Ruijie(config)#end
Ruijie#write
Sir, please try this command

0 2021-7-28 15:07:00 View all replies

Dear sir,

Please try with this command
Ruijie#con ter
Ruijie(config)#ip default-gateway x.x.x.x ---gateway IP
Ruijie(config)#end
Ruijie#wr

0 2021-8-3 15:03:17 View all replies

Please try with the following
Ruijie#config ter
Ruijie(config)#ip default-gateway x.x.x.x

0 2021-8-4 15:45:16 View all replies

try with the command
Ruijie#config ter
Ruijie(config)#ip default-gateway 192.168.1.1
Ruijie(config)#end
Ruijie#wr

Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd