The meaning of Reyee wireless LED Indicators

	LED  Indicator	State	Frequency	Meaning
Indoor AP RAP2260(G/E)	LED  Indicator	Off	N/A	The  AP is NOT receiving power.
		Blinking	0.5Hz	Normal  operation, but there are alams
		Fast blinking	10Hz	Possible  cases:     1. Restoring the factory settings     2. Upgrading the firmware     3. Restoring the image file     4. Initializing the device
		Solid green	N/A	Normal  operation
Indoor AP RAP2200(F/E)	LED  Indicator	Off	N/A	The  AP is NOT receiving power.
		Blinking	0.5Hz	Normal  operation,but the AP is not conneted to Ruijie Cloud
		Fast blinking	10Hz	Possible  cases:     1. Restoring the factory settings     2. Upgrading the firmware     3. Restoring the image file     4. Initializing the device
		Solid green	N/A	Normal  operation
Wall AP RAP1200(F/P)	LED  Indicator	Off	N/A	The  AP is NOT receiving power.
		Blinking	0.5Hz	Normal  operation,but the AP is not conneted to Ruijie Cloud
		Fast blinking	10Hz	Possible  cases:     1. Restoring the factory settings     2. Upgrading the firmware     3. Restoring the image file     4. Initializing the device     5. Self-repairing
		(F)Solid blue (P)Solid green	N/A	Normal  operation
Outdoor AP RAP6260(G)	LED  Indicator	Off	N/A	The  AP is NOT receiving power.
		Blinking	0.5Hz	Normal  operation,but the AP is not conneted to Ruijie Cloud
		Fast blinking	10Hz	Possible  cases:     1. Restoring the factory settings     2. Upgrading the firmware     3. Restoring the image file     4. Initializing the device
		Solid blue	N/A	Normal  operation
Outdoor AP EAP602	WiFi(Blue)	Off	N/A	WIFI  is disabled
		Blinking		Data  is transmitted by WiFi
		Solid on		WIFI  is enabled and no data is transmitted
	WARN(Red)	Off		Powered  off or initialization test is normal.
		Blinking	1Hz	Initialization:  on for 505ms and off for 505ms
			14Hz	Restore  factory settings: on for 20ms and off for 50ms
			10Hz	System  upgrade: on for 40ms and off for 60ms
		Solid on		CWMP  is not connected.
	LAN 1/2(Blue)	Off	N/A	The  port is not connected.
		Blinking		The  port is up and data is transmitted
		Solid on		The  port is up and no data is transmitted
Bridge EST310	System  Status	Solid  green	N/A	Video  recorder mode
		Fast blinking green		The  system is being upgraded or reset.
		Slow blinking green	2Hz	Camera  mode
	LAN Port Status	Solid  on		The  LAN port is not receiving or transmitting data.
		Blinking		The  LAN port is receiving or transmitting data.
	RSSI (3 LEDs in total)	LED  1 blinks		RSSI  < -69dBm
		LED 1 is solid on		-69dBm<  RSSI <.59dBm
		LED 1 and LED 2 are solid on		RSSI  > -59dBm
		LED 1, LED 2   and LED 3 are solid on		RSSI  > -49dBm
		Off		No  signal
Bridge EST350	System  Status	Solid  green	N/A	The  device is working properly
		Fast blinking green		The  system is being upgraded or reset.
		Slow blinking green	1Hz	The  device is being boot.
	LAN Port Status	Solid  green		The  LAN port is not receiving or transmitting data.
		Blinking		The  LAN port is receiving or transmitting data.
	RSSI (3 LEDs in total)	STR1  blinking/on		The  device is bridged
		STR1 on		RSSI  > -75dBm
		STR1 on + STR2 blinking		RSSI  > -73dBm
		STR1 on + STR2 on		RSSI  > -71dBm
		STR1 on + STR2 on + STR3 blinking		RSSI  > -68dBm
		STR1 on + STR2 on+ STR3 on		RSSI  > -64dBm