|
Requirement ● EG works as a DHCP server to assign IP addresses to wireless users and AP & switch devices ● The AP & switch devices obtain the IP address 192.168.110.0/24 in default VLAN network segment for Internet access ● The wireless users obtain the IP address 192.168.6.0/24 in the VLAN6 network segment for Internet access Network Topology  Configuration Steps Step 1: Click Router -> Basics-> LAN-> LAN Settings-> Add, Configure LAN Settings and DHCP pool of VLAN1 and VLAN6 network segment on the EG.     Step 2: Click Switches-> Manage-> Basic Settings-> VLAN Member to create VLAN6 on the switch, and clickVLAN Settings to set port2 and port9 which connect to AP and EG to trunk port and allow the VLAN1 and VLAN6 to pass through, then check the port settings on the device.     Step 3: Click Wireless-> Wi-Fi-> Wi-Fi Settings, Configure SSID named Reyee_test and set VLAN6 to this ssid.   |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
