【MTFI】Can the reset button recover factory setting?
|
Canthe reset button recover factory setting? |
|
No, it can’t. Considering security, the reset button is only for restart and isn’t for recovery factory setting. If you want to recover factory setting, please use console to login (Telnet and SSL will prompt insufficient authority). Input jffs2reset&&reboot in CLI. |
admin replied at 2017-11-1 16:11 This is incorrect, press the reset button and remove the power, count to 10 and whilst keeping the button pressed in plug the power back in, wait 30 seconds and yoru router is reset |
Adaan Haupt replied at 2022-11-24 00:17 Hi sir, thank you for your reply. Normally, after pressing the reset button more than 5s, then device will be back to the factory settings. and please note to keep the device power on during reset  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
