How to reset and import configuration on Ruijie AP?

You can reset and Import configuration on Ruijie AP through the following configuration:
1.Reset:
(1) If the device has a button to restore factory settings, press the Reset button for more than 3 seconds to restore the device to factory settings. But all AP support reset.
(2) If the AP is in fit mode, we can log in to the AC, and enter the command:" ac-controller factory-reset apname"
we can also login to the AP, and enter the command: "Ruijie#apm factory-reset"
(3) if the AP is in fat mode, we can login to the AP via console or telnet and enter the command: "delete config.text",then restart the ap.

2.Import configuration: There are two ways to import the configuration
(1) web Import:

If the device supports the web UI, log in to the web UI, choose System Maintenance ＞Settings >Restore, and select Import configuration. Click the configuration file to be imported. Then the device automatically imports the configuration file. You can log in to the RSR router using the WEB UI.


(2) You can also command line import:
Ruijie#Right click to copy your configuration script
Ruijie#end
Ruijie#write