Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

How to config Weight parameters for 3 Lines WAN on EG210G-E Reply

justAhnDz

Level 1

How to config Weight parameters for 3 Lines WAN on EG210G-E
1802 3 2023-1-12 13:31:16
Original
Edited by justAhnDz at 2023-1-12 16:49

Good day!
I have EG210G-E and I want to use the load balance feature, I have 3 different ISP and want to configure loadbalance but I am confuse what parameter should I enter in weight if I choose Balanced Mode.

Here is the details of my ISPs speed.
ISP1 = 1000Mbps
ISP2 = 600Mbps
ISP3 = 800Mbps
I want to ISP1 to utilize 50% of its bandwidth and the ISP2 and ISP3 is 25% + 25% respectively.
What should I input in weight if this scenario I want to happen.
Thank you in advance for your answers. Much appreciated
.
RG-EG210G-E

Router
0 2023-1-12 19:56:54 Solved View all replies
Dear sir

The traffic will be spread across multiple links according to the weight of each WAN port. For example, if WAN and WAN1 weight are set to 3 and 2 respectively, 60% of the total traffic will be routed over WAN and 40% over WAN1. If you want ISP1 to utilize 50% of its bandwidth and the ISP2 and ISP3 is 25% + 25% respectively. You can set the weight as 2,1,1 as your picture showed.


Best regards
Jenny

0 2023-1-13 16:30:17 View all replies
Edited by justAhnDz at 2023-1-13 16:33

GTAC-Jenny replied at 2023-1-12 19:56
Dear sir

The traffic will be spread across multiple links according to the weight of each WAN port. ...
Thank you GTAC-Jenny for the fast response with regards to my concern.
Can I ask another question.
Can I combine my 3 ISP bandwidth as one using EG210G-E?

If can, can you show me how to do it.

0 2023-1-16 12:30:28 View all replies
justAhnDz replied at 2023-1-13 16:30
GTAC-Jenny replied at 2023-1-12 19:56
Dear sir

Dear sir

Sorry sir that Reyee EG cannot support link aggregation, but it can support bandwidth aggregation you can refer to this guide:
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3465



Best regards
Jenny

Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd