EG3230 Unstable speeds - Does not achieve csorrect speeds

Hi. My ISP is providing me at 600Mbps stable. However, I'm only getting 100-150Mbps on the EG3230 with Flow Policy disabled.

All cables are checked, CAT6 cables.

What to configure and/or what to check?

Hi sir, may i know how many users were connecting to this network when you are testing?  For communicating effciently and timely. Suggesting you communicate with us about this matter on our RITA--Live Chat.
    https://www.sobotws.cn/chat/pc/v ... p;tnk=1640783350297

I'm reupping this question since it is still my problem until now.
My ISP is providing me 800Mbps max, at 650Mbps stable. However, My EG3230 is only reaching 180+Mbps, barely reaching 200Mbps.



I have tried disconnecting all users, except in the Mgmt port of EG3230 to test the speed, however I'm still getting the same speed.
Whenever I test my speed directly from the ISP, yes, I'm getting 650-800Mbps.

I am really having a hard time with EG32.

Maco Cortes replied at 2023-1-23 11:21
I'm reupping this question since it is still my problem until now.
My ISP is providing me 800Mbps ma ...

Dear sir
Sorry for reply lately.
If you connect to other ports of this EG, will the speed test result be same low ?
Whenever I test my speed directly from the ISP, yes, I'm getting 650-800Mbps.  ----- are you using the same cable when connect to ISP directly ?


BTW, could you please provide the config.txt of this EG to us for troubleshooting ?


Best regards

Wayne

My RG-NBR-6215 E also have this problem


and i found that the setting below maybe can help.
Global Uplink Attack Defense

Uplink Packets Per IP: pps（0 ~ 100000 ）    3,000-5,000 recommended.

when i set to  5000, speed will be slow down.

so I try to set "100000" to test, and speed will become normal.