Description of common STA syslog

hello, guys
can you show me the common sta syslog and its meaning ?

1. Normal STA access.

Log	Description
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received
00:15:06:15:%WLAN-6-OUTPUT: STA(4c0f.6e04.b57c) actives in BSSID(0a1b.b120.6fa1): Auth succeed.	The authentication is successful.
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives assoc frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The association frame is received.
00:15:06:15:%WLAN-6-OUTPUT: STA(4c0f.6e04.b57c) actives in BSSID(0a1b.b120.6fa1): Assoc succeed.	The association is successful.

2. The STA uses the incorrect password forassociation when the WPA2-PSK encryption is configured.

Log	Description
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received.
00:23:36:32:%WLAN-6-OUTPUT: STA(0026.5a08.6380) actives in BSSID(0a1b.b120.6fa1): Auth succeed.	The authentication is successful.
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received.
00:23:36:32:%WLAN-6-OUTPUT: STA(0026.5a08.6380) actives in BSSID(0a1b.b120.6fa1): Auth succeed.	The authentication is successful.
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives assoc frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The association frame is received.
00:23:36:32:%WLAN-6-OUTPUT: STA(0026.5a08.6380) actives in BSSID(0a1b.b120.6fa1): Assoc succeed.	The STA is associated.
00:23:36:37:%WLAN-6-80211N: STA(0026.5a08.6380) leaves BSSID(0a1b.b120.6fa1): STAdisassoc, reason code(3).	The four-way handshake process fails and the STAis dissociated.

3. Active STA disconnection.

Log

Description

01:00:09:47: %WLAN-6-80211N: STA(0026.5a08.6380)leaves BSSID(0a1b.b120.6fa1): STA disassoc, reason code(3). *Jun 20 17:39:32.375: %WLAN-6-80211N:STA(a4ed.4e23.7ad4) leaves BSSID(0a0b.6bb1.d4d4): STA deauth, reason code(1),RSSI(27). %WLAN-6-80211N: STA(88c6.63d7.a164)leaves BSSID(0a1b.b120.0c1e): STA disassoc, reason code(8) WLAN-6-80211N: STA(001b.8bed.94cb)leaves BSSID(0a1b.b120.0c1e): STA deauth, reason code(3),

The STA performs dissociation or deauthentication actively.

4. Successful STA Roaming.

Log	Description
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received.
00:17:33:04: %WLAN-6-OUTPUT: STA(4c0f.6e04.b57c)actives in BSSID(0a1b.b120.6976): Authsucceed.	The authentication is successful.
00:17:33:04:%WLAN-6-OUTPUT: STA(4c0f.6e04.b57c) actives in BSSID(0a1b.b120.6976): Reasso succeed.	The STA is re-associated.

5. Failed STA Roaming.

Log	Description
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received.
00:17:33:04: %WLAN-6-OUTPUT: STA(4c0f.6e04.b57c)actives in BSSID(0a1b.b120.6976): Authsucceed.	The authentication is successful.
00:17:35:04:%WLAN-6-OUTPUT: STA(4c0f.6e04.b57c) actives in BSSID(0a1b.b120.6976): Reasso failed, status code(17).	Re-association fails.

6. Association is rejected due to too low STA RSSI.

Log	Description
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received.
00:17:42:15: %WLAN-6-OUTPUT: STA(4c0f.6e04.b57c)actives in BSSID(0a1b.b120.6fa1): Authsucceed.	The authentication is successful.
00:17:42:15:%WLAN-6-80211N: STA(4c0f.6e04.b57c) fails to active in BSSID(0a1b.b120.6fa1): RSSI(54) too low to join.	The current RSSI value is too low, which is 54.

7. Association is rejected because the STA number reachesthe upper limit.

Log	Description
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received.
00:17:45:21: %WLAN-6-OUTPUT: STA(4c0f.6e04.b57c)actives in BSSID(0a1b.b120.6fa1): Authsucceed.	The authentication is successful.
00:17:45:21:%WLAN-6-OUTPUT: STA(4c0f.6e04.b57c) fails to active in BSSID(0a1b.b120.6fa1): STA number reachs limit, status code(17).	The STA number reaches the upper limit.
00:17:45:21: %WLAN-6-OUTPUT:STA(4c0f.6e04.b57c) fails to active in BSSID(0a1b.b120.6fa1): Assoc failed, status code(17).	The association fails.

8. Association is rejected because the STA rate set doesnot match.

Log	Description
00:01:10:49:%WLAN-6-80211N: BSSID(0a1b.b120.6fa1) receives auth frame fromSTA(4c0f.6e04.b57c): RSSI(50).	The authentication frame is received.
%WLAN-6-OUTPUT:STA(4c0f.6e04.b57c) actives in BSSID(0a1b.b120.6fa1): Auth succeed.	The authentication is successful.
%WLAN-6-80211N:STA(4c0f.6e04.b57c) fails to active in BSSID(0a1b.b120.6fa1): Rateset mismatch, status code(1).	The rate set does not match.

9. STA Timeout.

Log	Description
00:17:56:16:%WLAN-6-80211N: STA(4c0f.6e04.b57c) is forced to leaveBSSID(0a1b.b120.0c1e): STA timeout due toinactivity,reason code(2).	The STA times out and goes offline.

10. The CAPWAP tunnel is disconnected.

Log	Description
WLAN-6-80211N:STA(4c0f.6e04.b57c) is forced to leave BSSID(0a1b.b120.6f1b): The state of vap had changed, deasso station, reason code(8)	The STA is dissociated from the AP because the VAP status has changed.

11. The STA is kicked out.

Log	Description
00:18:05:45: %WLAN-6-80211N:STA(4c0f.6e04.b57c) is forced to leave BSSID(0a1b.b120.6fa1):Disassoc by APMG, reason code(8).	The STA is associated with another SSID or roams to another AP of the same SSID. The RSNA module kicks the STA out from the original SSID or AP.
00:18:05:46:%WLAN-6-80211N: STA(4c0f.6e04.b57c) fails to active in BSSID(0a1b.b120.6fa1):data from unknown station.	Because the STA is deleted without the deauthentication frame, a log of unknown STA data source is printed.

12. The STA is kicked out because the rate is too low.

Log	Description
00:00:46:05:%WLAN-6-80211N: STA(78e4.00d3.1183) is forced to leave BSSID(0e1b.b120.5861):STA is kicked out due to low rx rate(35 Mbps), reason code(3).	The STA is kicked out because the rate is too low.

13. Packet from an Unknown STA.

Log	Description
01:13:35:01:%WLAN-6-80211N: STA(0026.c7a2.a6fa) fails to active in BSSID(061b.b18e.37f4):data from unknown station.	Currently, it is thought that it is because thechip cannot filter out all the useless packets. It is found that some STAs of some notebooks also receive packets not sent to them

14. The association or re-association packet WPAIE information is incorrect.

Log	Description
"%WLAN-6-80211N:STA(7c61.9337.f036) fails to active in BSSID(061b.b120.0c23): WPA informationelement parsed error, reason code(13)"	The AP fails to parse the received association/re-association packet and sends a deauthentication packet.Therefore, the STA association fails.

15. STA Association Timeout.

Log	Description
STA(4c0f.6e8c.6e8d)leaves BSSID(0a1b.b120.0c23): STA deauth, reason code(4)	If the STA does not receive the association response from the AP within the timeout period after sending anassociation packet, the STA sends a deauthentication packet

16. The main channel and working channel of theBeacon frame are inconsistent.

Log	Description
Inconsistency point: Work channel is 6,primary channel is 2	When the main channel and working channel of the Beacon frame are inconsistent, a message is prompt.

17.When the STA ps poll frame is received, a log indicating that the associated IDis empty.

Log	Description
STA(7c61.93ec.aab7)is forced to leave BSSID(061b.b122.5687): Client has NULL AID, reason code(7).	When the STA ps poll frame is received, a log indicating that the associated ID is empty is printed.