|
Enable the broadcast storm function on port 1 and limit the broadcast storm level to1. That is, 1% of the port bandwidth. Ruijie>enable Ruijie#configure termina Ruijie(config)#interface gigabitEthernet 1/1 Ruijie(config-if-GigabitEthernet 1/1)#storm-controlbroadcast level 1 ------>The broadcast storm suppression level is 1,that is, 1% of the port bandwidth, like 1% of 1 GB is 10 m. Ruijie(config-if-GigabitEthernet 1/1)#storm-controlunicast level 1 ------>Enable unknown list-based stormsuppression (The target MAC address of a packet is not learned by the switch.The level is 1, that is, 1% of the port bandwidth, like 1% of 1G is 10 m. Ruijie(config-if-GigabitEthernet 1/1)#storm-controlmulticast level 1 You can also limit the number of broadcast packets by PPS. For example, you can limit the number of broadcast packets to 200 per second Ruijie(config-if-GigabitEthernet 1/1)#storm-controlbroadcast pps 200 Ruijie(config-if-GigabitEthernet 1/1)#storm-controlunicast pps 200 Ruijie(config-if-GigabitEthernet 1/1)#storm-controlmulticast 200 Ruijie(config-if-GigabitEthernet 1/1)#end Check the configuration:  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
