Check rate limitation configuration enabled by different devices 1. Rate limitation on Ruijie EG (1) Check whether IP range is correct 2. Check If user enables Flow Control 3. If the user chooses the corresponding user group 4. Check whether users add the policy successfully 2. Rate limitation on Ruijie AP AP-based rate limit: Format: Fat AP(config)#wlan-qosap-based {per-user-limit | total-user-limit } {down-streams | up-streams}average-data-rate average-data-rate brust-data-rate brust-data-rate FatAP(config)#wlan-qosap-based per-user-limit down-streams average-data-rate 800 burst-data-rate 1600 Wlan-based rate limit: Format: Fat AP(config)#wlan-qoswlan-based {wlan-id | ssid} {per-user-limit | total-user-limit} {down-streams |up-streams} average-data-rate average-data-rate brust-data-rate brust-data-rate FatAP(config)#wlan-qoswlan-based 1 per-user-limit down-streams average-data-rate 800 burst-data-rate 1600 Mac-based rate limit: Format: Fat AP(config)#wlan-qosnetuser mac-address {inbound | outbound} average-data-rate average-data-rate burst-data-rate burst-data-rate FatAP(config)#wlan-qosnetuser 0001.0001.0001 inbound average-data-rate 800 burst-data-rate 1600 Note: Check the commands are delivered successfully Ruijie#show run---->check if the corresponding commands are taking effect? 3. Rate limitation on AC Check the commands are delivered successfully. AP-based rate limit: Ruijie(config)#ap-configRJAP Ruijie(config-ap)#ap-basedper-user-l imitdown-streams average-data-rate 800 burst-data-rate 1600 Wlan-based rate limit: AC(config)#wlan-config1 RL AC(config-wlan)#wlan-basedper-user-limit down-streams average-data-rate 800 burst-data-rate 1600 Mac-based rate limit: AC(config)#ac-controller AC(config-ac)#netusermac-address { inbound | outbound }average- data-rateaverage-data-rate burst-data-rate burst-data-rate AC#show dot11 ratelimit wlan AC#show dot11 ratelimit user AC#show dot11 ratelimit ap 4. Rate limitation on Reyee EG rate limiationon Reyee EG |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd