You can configure it according to the following command Fit Mode: Ruijie (config) #ap-config AP0001 (AP0001 is the name of the AP) Ruijie (config) #ap-config all (enable for all APs) Ruijie (config-ap) #11axsupport enable radio 1 ---- > Enable radio 1 to support WiFi6 function under 2.4G Ruijie (config-ap) #11axSupport enable radio 2 ---- > Enable radio 2 to support WiFi6 function under 5G Fat Mode/Macc Mode: Ruijie(config)#int dot11radio 1/0 Ruijie(config-if-Dot11radio 1/0)#11axsupport enable ---->Enable radio 1 to support WiFi6 function under 2.4G Ruijie(config-if-Dot11radio 1/0)#exit Ruijie(config)#int dot11radio 2/0 Ruijie(config-if-Dot11radio 2/0)#11axsupport enable ----> Enable radio 2 to support WiFi6 function under 5G Ruijie(config-if-Dot11radio 2/0)#end Ruijie#wr |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd