|
You can configure vlan-group on AC as follows: 1.Configuration Steps: Ruijie# configure terminal Ruijie(config)# vlan-group 10 //Create VLAN Group 10 Ruijie(config-vlan-group)# vlan-assign-mode dot1x //Set the VLAN assignment mode to 802.1X-based mode Ruijie(config-vlan-group)# vlan-list 1-10 //Configure a VLAN list that contains VLAN 1 to VLAN 10 Ruijie(config-vlan-group)# default-vlan 1 //Set the default VLAN to VLAN 1 Ruijie(config-vlan-group)# end 2.Check whether the configurations of VLAN Group 10 are correct: Ruijie#show vlan-group 10 vlan-group id mode default-vlan vlan-list ---------------------------------------------------------------------- 10 dot1x 1 1-10 |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
