1. Configuration tips The USB flash drive back up only applies when the EG supports USB flash drive 2. Topology 3. Configuration steps 3.1 Confirm the current configure file. 3.2 Plug the FAT32 USB flash drive into the USB port of Ruijie EG (you can format the USB flash drive if the format is not FAT32). 3.3 Log in to the Ruijie EG and run the following command on the EG to back up the configuration to the USB flash drive: Ruijie#copy flash:config.text usb0:config.text --->There is no space between usb0 and config.text 4. Verification Plug USB flash drive in PC and check the configure file |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd