You can run the poe power-off time-range range-name command to configure the periodic power-off function for a PoE port. PoE does not power the connected PD during the time-range clock cycle. 1. Set a time range (The time range can not span 00:00). For example, for the time period from 10:00 p.m. to 7:00 a.m, the command is as follows: Ruijie(config)#time-range aaa Ruijie(config-time-range)#periodic daily 0:00 to 7:00 Ruijie(config-time-range)#periodic daily 22:00 to 23:59 2. Switch will not provide PoE power supply Ruijie(config)# interface fastEthernet interface-id --->Enter the interface configuration mode and specify the physical ports to configure Ruijie(config-if)# poe power-off time-range range-name --->Specifies the time period for managing the power-on and power-off of an interface Ruijie(config-if)# no poe power-off time-range--->Disable the time range management function |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd