Device Login
|
Edited by Levy at 2018-6-21 14:07 How to login firewall by using default IP address? |
|
User can manage firewall device through https web management (192.168.1.200/24). Here are the ports can be managed on firewall with default setting: • RG-WALL 1600-X9300 : MGMT1 • RG-WALL 1600-X8500 : MGMT1 • RG-WALL 1600-X6600 : MGMT1 • RG-WALL 1600-M5100 : MGMT • RG-WALL 1600-S3600 : internal (1-14) • RG-WALL 1600-S3100 : internal (1-7) Step1: Set a static IP address for your PC with same subnet as firewall (e.g. 192.168.1.1/24) Step2: Connect your PC to firewall’s MGMT or internal port. Step3: Open https://192.168.1.200 with your browser and enter default username & password(admin/firewall) |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
