Ruijie RG-EW1800GX PRO Bandwidth Control Feature

Hello, I want to ask is Ruijie RG-EW1800GX PRO support Bandwidth Control feature?
If it does, what kind of Bandwidth control it has, is it by limiting bandwidth per IP Range, or per SSID, or is it by per devices?
Thank you in advance

Dear,
Good day,
The RG-EW1800GX PRO  router has the flow control funtion where you can configure bandwidth at the WAN level, meaning it applies to all devices in the equiment's network.
When enabled, this feature allows the creation of policies for IP ranges or specific IPs.
You can use this link as a reference, page 56
https://www.ruijienetworks.com/resources/preview/ruijie-reyee-home-wi-fi-router-implementation-cookbook-en







Best regards,
Karen | Support team

AnaKarenDuranUrrutia replied at 2024-1-9 03:07
Dear,
Good day,
The RG-EW1800GX PRO  router has the flow control funtion where you can configure b ...

Thanks for your responses,
But I still need to know more for this feature, please help me to know more
For example, my DHCP IP is 192.119.19.1

1. If one user has IP 192.119.19.10, and I put that IP in the IP form, so will that IP get limited bandwidth?
2. If I put IP range 192.119.19.10 - 192.119.19.254, so if I make static IP for my phone like 192.119.19.5, will I also affected by bandwidth limit?

Thank you

Aris Toteles replied at 2024-1-9 04:32
Thanks for your responses,
But I still need to know more for this feature, please help me to know  ...

Dear,
1. If one user has IP 192.119.19.10, and I put that IP in the IP form, so will that IP get limited bandwidth? Yes.

Example:
* Scenario IP
A policy is created for the IP 192.168.110.193 where the bandwidth is set at
UP: 5Mbps Down: 7Mbps.
Test are run for the two connected clients




PC speed


Phone speed



2. If I put IP range 192.119.19.10 - 192.119.19.254, so if I make static IP for my phone like 192.119.19.5, will I also affected by bandwidth limit?  Yes


* Scenario  IP range


A policy is created for the IP range 192.168.110.107 -192.168.110.193 where the bandwidth is set at
UP: 20 Mbps Down: 20 Mbps.
Test are run for the two connected clients



PC speed






Phone speed



Regards

AnaKarenDuranUrrutia replied at 2024-1-9 08:04
Dear,
1. If one user has IP 192.119.19.10, and I put that IP in the IP form, so will that IP get l ...

Thanks for the explanations
But for point No.2, in the phone's wifi section, we can input static IP manually when we about to put the wifi password, is it correct?
Based from the explanation, the IP range is 192.168.110.107 -192.168.110.193, and if I put my phone IP manually as Static IP to 192.168.110.5 or 192.168.110.105, will it still affected by Bandwidth Limit even tough the IP is outisde / not included between the IP Range?
Or maybe should I make another Custom Flow Control Policy with my phone IP and set the set the maximum bandwidth to it?

Aris Toteles replied at 2024-1-9 11:36
AnaKarenDuranUrrutia replied at 2024-1-9 08:04
Dear,
1. If one user has IP 192.119.19.10, and I put  ...

Dear,
If you seta static IP on the phone that is not within the range of IPs to which the speed policy is applied, it will not be affected by that policy.
If you need set a maximum bandwidth policy for that IP.

AnaKarenDuranUrrutia replied at 2024-1-9 23:46
Dear,
If you seta static IP on the phone that is not within the range of IPs to which the speed p ...

Alright, thanks again, but last question
Does this bandwidth control feature also applicable in EW3000GX Pro and EW3200GX Pro?
Or are both of those have different Bandwidth Control method?
Because I got like mixed informations saying these 2 routers didnt have Bandwidth Control

Aris Toteles replied at 2024-1-10 21:19
Alright, thanks again, but last question
Does this bandwidth control feature also applicable in EW ...

Dear sir

for EW3000GX Pro and EW3200GX Pro
they can also support bandwidth Control
we can see similar configuration like Flow Control on the web interface of the device


best regards
Ross