|
Overview Reyee EW Router has four modes to choose from atthe beginning (router mode, relay mode, Mesh wifi, WISP), and two modes(EWEB/APP).  Keywords EW Router,opening, configuration, SSID , Internet  Router mode failure phenomenon 2.1 Issue Description ① router to obtain ip address failed ② end point connection ssid failed ③ After connecting to ssid , the end point cannotaccess the Internet after obtaining the ip address 2.2 Issue Analysis ①Confirm whether the selected internet accessmethod is correct (PPPoE or DHCP). ②Check if the ports connected to the router andoptical modem are correct ③Confirm that the wifi password is enteredcorrectly. 2.3 Solution ① If directly connected to ISP , you need to confirmwhether the PPPoE account password is correct  ② If it is connected to the modem provided by theISP , confirm the LAN port connected to the optical modem side and the WAN portconnected to the router side  Log in to the router again, reset the wifi password,and press the "eye" icon to confirm that the end point input iscorrect; or directly disable password verification and create an open networkfor testing  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
