Perority for some devices on eg 3200gx pro

Hi how to give perority some devices like for example my ps5 device for packets sending and receiving first on eg 3200 gx pro
I have 6 devices connected to my eg 3200 but i want to give one device perority for sending packets and recieving first? How to do that?

Hi Ahmad,
If you want to establish priority to your EG 3200GX PRO, please go to More Tab > Advanced > Flow Control


*If you cannot see like this (first scroll down in the options of your Reyee Router App and tap on "Switch to PC view")
Now please enable Smart Flow Control and switch to Custom Policy Tab and Add a new policy PS5 for instance:

And set the desired values within the range of bandwidth provided by your ISP.
You would have to change the IP Address settings of your PS5 from Automatic to Manual.
Considering your scenario only, If you want to have a better gaming experience, you have to use XPress
In the Mobile Phone View: Choose More Icon > XPress (and Enable)

PC View: Choose More > WLAN > Wi Fi Settings > Advanced Settings>  XPress (enable)

Turn on XPress and click Save to save the configuration. After XPress is enabled, you will have a faster
gaming experience.
Hope this information can help you, BR
Rod

RodrigoJoseTorresGarcia replied at 2024-3-14 10:48
Hi Ahmad,
If you want to establish priority to your EG 3200GX PRO, please go to More Tab > Advanced  ...

But Xpress only work for wifi gaming I'm on a lan with ps5?

Ahmad Ali replied at 2024-3-14 11:28
But Xpress only work for wifi gaming I'm on a lan with ps5?

Dear Ahmad Ali,

You may still configure flow control for the PS5 based on its IP address. Or you can disable Smart Flow Control and enable Hardware Acceleration to improve the speed:



Best regards,
Jayden

GTAC-Jayden replied at 2024-3-14 11:42
Dear Ahmad Ali,

You may still configure flow control for the PS5 based on its IP address. Or you ...

I don't wanna improve speed i want to lower the ping

Ahmad Ali replied at 2024-3-14 12:36
I don't wanna improve speed i want to lower the ping

Hi,

Sorry for any misunderstanding caused.
Pls try the flow control policy and the hardware acceleration, these 2 functions can help reduce ping delay

Regards
David

GTAC-David replied at 2024-3-14 13:50
Hi,

Sorry for any misunderstanding caused.

You can't turn on hardware acceleration and flow control together that's a problem

Ahmad Ali replied at 2024-3-14 15:13
You can't turn on hardware acceleration and flow control together that's a problem

I am sorry that our EW does not support set the priority based on device for the time being. I will feedback your requirements to R&D. If you need to, you can temporarily use the XPress function under wireless users, which can prioritize the forwarding of game packerts.