DDNS of RG-EG3250

Hi Everybody,
Sorry if my English no good. I have a problem about DDNS, Management IP, Egress IP of EG3250.

I have:

+ two Wan (Wan 1 : PPPoe, IP Wan 1: 113.162.9.85; Wan 2 : Static IP, IP Wan 2: 10.3.237.60). Wan 1 connect to Gi0/9, Wan 2 connect to Gi0/6

+ DDNS: I choose Public IP, 116.98.248.232. If I choose Wan IP, I can't choose Gi0/9 (it is grey out). Therefore I can choose Auto (10.3.237.60) or Gi0/6 (10.3.237.60)

+ Management IP: 10.3.237.60

+ Egress IP: 116.98.248.232

If I want to change Management IP and Egress IP to 113.162.9.85, I go to IP-Based Route and choose Default Route of 10.3.237.60 from "Primary Route" to "Back up route-1". And then I choose "Back up route-1" to "Primary Route" (I run Balance load). But when Router reboot, the Egress IP is changed to 116.98.248.232, I can't connect with my recorder camera (It use Domain name) and another application as VPN error

Because I have a DDNS with Domain name, and I want Egress IP is alway is 113.162.9.85 to some application : VPN, IPTV, VoiIP. How can I do ? Please help me to solve this problem.

Thank you everyone !

Hello,

May you help to take the screenshot of routing setting for me?
You can try to configure pbr and set the address to access the cloud server to the port that has a public ip address

Here is the guide of PBR: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3842&extra=page%3D1
If the issue still exists, please talk with me again. I would be glad to help you in Community.

Best regards,
Micca

GTAC-Micca replied at 2024-7-8 18:03
Hello,

May you help to take the screenshot of routing setting for me?

Dear Mr Gtac-Micca,
When I writed this question, I has changed some IP, sorry about this.
Wan 1, Wan 2 go to DI4(Gi0/9), Gi0/6 of EG3250. And Gi0/1 (of E3250) go to Firewall. From Firewall goto switch core => switch acess


14.238.2.146 is IP Server of ISP 113.161.8.57 (Wan1-PPPoe)

10.2.234.53 is gateway of ISP 10.2.234.54 (Wan 2-Static Wan)

I send to you some Picture. If you need any picture, you send to me to take it. I don't know Command to change default IP of Router. I want Management IP and Egress IP of Router is alway is 113.161.8.57. Please tell me the way to solve this trouble.