|
SFP, WAN0, WAN1 cannot be converted to L2. Method 1: Covert interface on web Step 1: Enter the web of EG locally or through cloud. Step 2: Click Network>Interface>Interface Conversion.  Step 3: Convert the interface you want to the L2 port. Interface conversion will take effect after the device is restarted. Method 2: Covert interface via CLI Step1: Enter the CLI interface of EG. Step 2: Input the following commands to covertspecific port to L2 port. NBR6215-E>enable NBR6215-E#configure terminal NBR6215-E(config)#no convert port 3 ##### Please save config and reload the system!!!!! NBR6215-E(config)#end NBR6215-E#write Building configuration.. [ok] NBR6215-E#reload Reload system?(Y/N)Y |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
