Keywords: AP840-L, WLAN Speed TestIssue Description (1) The measured wireless rate and negotiated rate for clients connected to the AP840-L are low. Device Model and Firmware
2. Check the configurations and negotiated rate on the AP associated with the abnormal wireless clients. It is found that the negotiated rate is only 433 Mbps on the 80 MHz channel. 3. Check the PoE power supply. The power supply mode is set to 802.3af. When the AP operates in this mode, it can only provide a single spatial stream due to insufficient power. As a result, both the negotiated rate and the measured rate for the wireless client are low. Root Cause The Cisco switch provides power to the AP840-Lin 802.3af mode, which is insufficient. As a result, the rate measured by the wireless client is low. Solution 1. When a Cisco switch is connected to the AP840-L, the switch can only provide power to the AP840-L in 802.3af mode by default. If the AP840-L is forcibly configured to operate in 802.3at mode, it may restart abnormally. The following solutions can be implemented to enable 802.3at power supply for the AP840-L: (1)Solution 1 (when AP840-L works in 802.3af mode): Set the power supply mode on the Cisco switch to Auto mode, and run the pd poe-force af command on the AP840-L. (2) Solution 2 (when AP840-L works in 802.3at mode): Set the power supply mode on the Cisco switch to Static mode (PoE output power of 30 W) and configure the AP to work in 802.3at mode (PoE output power of 25 W). 2. After Solution 2 is implemented to solve the power supply issue, the speed of wireless clients connected to the AP840-L can reach the expected value. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd