Hi there First thing a few words about what i have AP840-I AP_RGOS 11.9(6)B1, Release(07201411) AC_RGOS 11.9(6)W1B1, Release(09192520) So i am planning to use a aggegate port to test 802.11ax on more than 1 Gb/s link. According to docs I 've done config on AC: ap-group TEST-GroupAP-T interface-mapping 1 426 radio 802.11a ap-wlan-id 1 interface-mapping 2 426 radio 802.11a ap-wlan-id 2 interface-mapping 3 426 radio 802.11a ap-wlan-id 3 ap-interface wireport 1 port-group 1 ap-interface wireport 2 port-group 1 ! ap-config all ap-interface wireport 1 port-group 1 ap-interface wireport 2 port-group 1 On the access side we have a cisco switch. This is a cisco part: interface Port-channel70 description TST_WIFI6_AP switchport access vlan 770 switchport mode access switchport nonegotiate storm-control broadcast level 20.00 storm-control multicast level 20.00 storm-control action shutdown storm-control action trap spanning-tree portfast spanning-tree bpduguard enable ip dhcp snooping limit rate 10 interface GigabitEthernet1/0/26 switchport access vlan 770 switchport mode access switchport nonegotiate storm-control broadcast level 20.00 storm-control multicast level 20.00 storm-control action shutdown storm-control action trap channel-group 70 mode on As far I know lacp not supported, static etherchannel only. Unfortunately, it doe not work no matter I play. Ruijie#sh aggregatePort summary AggregatePort MaxPorts SwitchPort Mode Ports ------------- -------- ---------- ------ ----------------------------------- Is it any change to bind Ruijie and Cisco come together? |
Hi, sir It is not suggested to configure aggregated port between AP and switch from other vendor |
Patrick replied at 2022-11-10 13:56 I am understand that. But is there a way? |
Max Bezzubov replied at 2022-11-10 20:33 Sorry about that, no other way can do that, because differences in algorithms may result in failure to create aggregated port. |
Patrick replied at 2022-11-11 11:41 Thats wierd. According to docs this is a standard LAG (static aggregation). Or there is not an accuracy documentation? |
Max Bezzubov replied at 2022-11-11 18:48 Sorry, not an accuracy document for you. |
live baccarat replied at 2022-11-14 17:47 If MS Outlook is used frequently, you may get the error code [pii_email_99514d5fed5d3eee8cdd]. This means that the business processes are stopped in the meantime, and the application of MS Outlook should remain installed with the latest version is common. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd