Configuring Aggregated Port

Hi there

First thing a few words about what i have
AP840-I AP_RGOS 11.9(6)B1, Release(07201411)
AC_RGOS 11.9(6)W1B1, Release(09192520)



So i am planning to use a aggegate port to test 802.11ax on more than 1 Gb/s link. According to docs I 've done config on AC:

ap-group TEST-GroupAP-T
interface-mapping 1 426 radio 802.11a ap-wlan-id 1
interface-mapping 2 426 radio 802.11a ap-wlan-id 2
interface-mapping 3 426 radio 802.11a ap-wlan-id 3
ap-interface wireport 1 port-group 1
ap-interface wireport 2 port-group 1
!
ap-config all

ap-interface wireport 1 port-group 1
ap-interface wireport 2 port-group 1

On the access side we have a cisco switch. This is a cisco part:

interface Port-channel70
description TST_WIFI6_AP
switchport access vlan 770
switchport mode access
switchport nonegotiate
storm-control broadcast level 20.00
storm-control multicast level 20.00
storm-control action shutdown
storm-control action trap
spanning-tree portfast
spanning-tree bpduguard enable
ip dhcp snooping limit rate 10

interface GigabitEthernet1/0/26
switchport access vlan 770
switchport mode access
switchport nonegotiate
storm-control broadcast level 20.00
storm-control multicast level 20.00
storm-control action shutdown
storm-control action trap
channel-group 70 mode on
As far I know lacp not supported, static etherchannel only.






Unfortunately, it doe not work no matter I play.





Ruijie#sh aggregatePort summary
AggregatePort MaxPorts SwitchPort Mode   Ports
------------- -------- ---------- ------ -----------------------------------
Is it any change to bind Ruijie and Cisco come together?

Hi, sir
It is not suggested to configure aggregated port between AP and switch from other vendor

Patrick replied at 2022-11-10 13:56
Hi, sir
It is not suggested to configure aggregated port between AP and switch from other vendor

I am understand that. But is there a way?

Max Bezzubov replied at 2022-11-10 20:33
I am understand that. But is there a way?

Sorry about that, no other way can do that, because differences in algorithms may result in failure to create aggregated port.

Patrick replied at 2022-11-11 11:41
Sorry about that, no other way can do that, because differences in algorithms may result in failur ...

Thats wierd. According to docs this is a standard LAG (static aggregation). Or there is not an accuracy documentation?

Max Bezzubov replied at 2022-11-11 18:48
Thats wierd. According to docs this is a standard LAG (static aggregation). Or there is not an acc ...

Sorry, not an accuracy document for you.

live baccarat replied at 2022-11-14 17:47
우리는 최고의 라이브 바카라 당신이 경험한 적이 있습니다. 많은 돈을 벌 수 있는 게임이 있습니다.
그리 ...

If MS Outlook is used frequently, you may get the error code [pii_email_99514d5fed5d3eee8cdd]. This means that the business processes are stopped in the meantime, and the application of MS Outlook should remain installed with the latest version is common.